All Categories

  • All Categories
  • Mouse Pads
  • USB Cables
  • DVI Cables
  • Ethernet Cables
  • Styli
  • Tablet Keyboards
  • Tablet computer support
  • PC Headsets
  • Selfie Sticks
  • Power Supplies
  • USB Fans
  • USB Hubs
  • Laptop Computer Stands
  • Laptop Screen Protectors
  • Laptop Batteries
  • External Hard Drives
  • Gamepads
  • PC Speakers
  • Laptop cooling pad

10x RJ45 CAT6 FTP/STP CABLE END CRIMP PLUGS -8P8C CONNECTORS- NETWORK ETHERNET - B00BMQXVYI

rating
  • £7.99£43.45
  • Product Code:B00BMQXVYI
  • Availability:In Stock

This fits your . Make sure this fits by entering your model number. RJ45 CAT6 CRIMP PLUGS ..

This fits your .
  • Make sure this fits by entering your model number.

  • RJ45 CAT6

  • CRIMP PLUGS

  • 8P8C CONNECTORS

  • NETWORK ETHERNET

  • QTY 10

  • RJ45 8P8C FTP Connectors

    Qty - 10 Used for - Termination connector for crimping on to the ends of FTP CAT6 cable This is the standard 8P8C (Eight Position, Eight Contact) Ethernet connector, commonly referred to as RJ45. Most frequently used in PC networking applications, such as connecting PCs together, or to a modem, router or switch. These connectors can be used with stranded or solid core cabling. Our connectors are FTP which means they can be connected to FTP cable to help shield the cable from interference. To make sure the shield is utilised within the cable, please make sure your RJ45 sockets in your equipment you plan to use these connectors with are shielded too.

    Installation - Using a CAT5e crimping tool (Not Included), strip the insulation from the end of a piece of CAT5e FTP cable, line up the coloured wires within to the pins, cut away some of the foil but allow it to go past the cable grip on the connector. Once the wire are all seated, squeeze the connector with a CAT6 crimp tool.

    Variants - These connectors can be fitted to CAT6 Cable, using either of the industry standard TIA/EIA-568-A or TIA/EIA-568-B wiring configurations shown above, to create 'Straight Through' or 'Cross Over' cables.

    'Cross over' cables are usually used for connecting 2 computers directly to one another, without the use of a Hub or Router. They use TIA/EIA-568-A wiring at one end, and TIA/EIA-568-B at the other.

    'Straight through' cables can be used for connecting a PC or games console to a Hub/Router, or, in conjunction with AV extender devices, for audio and video distribution throughout a home or commercial project. To create a 'Straight through' cable, it should be wired using the same wiring variant at both ends. Either '568-A to 568-A' or '568-B to 568-B'

    10x RJ45 CAT6 FTP/STP CABLE END CRIMP PLUGS -8P8C CONNECTORS- NETWORK ETHERNET - B00BMQXVYI

    Write a review

    Please login or register to review